Chapter 988 Meeting an opponent in chess
Actually, Chang Haonan is also somewhat interested in this symposium.
??It''s not that he was worried about the outcome of Yan Zhongcheng''s battle with the opponent, so he had to play in person.
Mainly just want to satisfy curiosity.
Previously, he had only learned about the current general situation of 052C from a few words from Lin Qing and Wang Xiaomo.
It is not clear what this key model, which is the link between previous generations, looks like today.
Since the Navy and the Navy have put forward the idea of ??"continuing to improve the 052C", the updated 052D should at least have an overall plan.
Considering that the power of two QC300s is 20% more than that of two GT25000s, this model is likely to choose a more radical design solution.
?Of course, with Chang Haonan''s current position, if he specially sent a letter to ask, he would definitely get a response.
But if we work hard just for such a thing, it seems a bit unworthy...
?However, if you are interested, you are still interested.
Since the Naval Equipment Department specially held such a meeting before the official selection, and only invited technical personnel at the institute level to participate, it was obviously intended to reduce the impact of the selection results on the selection results by the top brass of the two major military industry systems to a certain extent. non-technical impact.
?Chang Haonan, as the chief designer of Turbofan 10, is in a special situation. Of course, he can also be interpreted as a technical staff.
??But this is breaking the rules of the game—
?The Aviation Power Group has sent a leader, so for the sake of reciprocity, does the Shipbuilding Industry Group of another company also have to send a leader?
Once the two of you sit there, the Naval Equipment Department will be a little overwhelmed. Do the general assembly and navy chiefs also need to be present?
?Then what kind of symposium will be held?
Just make the selection in advance...
Therefore, Chang Haonan finally suppressed his eagerness to try.
…
The symposium is scheduled for February 26, three days later.
The situation is similar to Chang Haonan’s previous estimate.
The leading roles are the Aviation Power Institute 606 and the Shipbuilding Industry Institute 703.
It’s just that the other research institutes invited are not entirely a foil.
Because the theme of this symposium is strictly speaking "Development of Ship Power System".
In addition to the gas turbine as the core, gearboxes, propulsion systems, cruise diesel engines, power generation auxiliary engines, etc. are also included in the discussion.
?Of course, not every one of them involves selection issues.
?At present, China''s scientific research resources are still relatively limited, and it is impossible to afford free competition among multiple parties in all fields.
As for private enterprises…
Private enterprises at the beginning of the 21st century had no hope at all.
In fact, according to the original plan, even the gas turbine should have only one option for this project.
You should know that Huaxia has been exposed to UGT25000 from Ermao in the early 1990s, and a few years later decided to use it as the power system of 052B/C and localize it.
By this time in 2002, this project had been progressing step by step for about five or six years.
?It’s just that a competitor appeared halfway through that no one expected—
?Chang Haonan said at the founding meeting of the Aviation Power Group that he would build a 30-megawatt aeroderivative gas turbine. This is something everyone knows.
But the problem is, for aviation to be converted to fuel, you must first have navigation.
?The common estimate in the industry at that time was that the Turbofan 10 would be completely finalized around 2005.
After stabilizing for a period of time, the project will be initiated to develop aeroderivative gas turbines, and then after the gas turbines are finalized, it will be after 2010.
In other words, everyone feels that the high-power gas turbine of the Aerospace Power Group should be prepared for the next generation of brand-new surface ships.
As a result, even Chang Haonan did not expect that the production of turbofan 10 could be finalized so smoothly that he could start considering the design of QC300 in early 2002... This disrupted the Navy''s previous equipment update plan.
For the 703 Research Institute, which has already studied GT25000 extensively, this matter is even more outrageous.
??While eating hot pot and singing songs, the project I got was suddenly blocked.
How can you bear this?
Therefore, when the symposium came to the topic of gas turbines, Wen Xueyou, the chief engineer of the 703 Institute in charge of GT25000, directly brought out the results of these years of visiting...
"I believe that comrades in the Navy are already very familiar with the performance of the UGT25000 prototype. I will only give a brief introduction here. It has currently been tested on the 052B Type 168 ship, and its performance is fully in line with expectations. The 052C type that has entered the equipment outfitting stage also uses this model..."
…”
Compared with QC300, the main advantage of GT25000 is that the situation is known and can be taken almost immediately.
? ? Thanks to the rapid progress of the overall level of China''s machinery industry on this timeline, the latter''s localization process has been almost smooth sailing since the turn of the millennium.
After a brief background introduction, Jacky Wen quickly entered the topic of today:
“What I want to focus on next is that while we are domesticating the GT25000, we are also improving and upgrading it.”
“First of all, as early as the late 1990s, our institute constructed a zero-dimensional full-machine model and a two-dimensional component-level model of the GT25000, and based on this, we conducted theoretical research on the feasibility of adding an intercooling heat recovery system.”
“Later, we also carried out intercooling heat recovery modification on a 401A gas turbine based on the research results, and completed the preliminary program demonstration as a technology demonstrator.”
“According to the test results, its thermal efficiency has increased by about 3.8% compared with before the transformation, and its output power has increased by about 5%…”
…”
The development direction of marine gas turbines is tangible, so it is expected that the 703 Institute will also consider the intercooled heat recovery system as a future upgrade route.
??As for taking advantage of my own experience in marine power to develop a prototype as early as possible, it is even more logical.
Therefore, after Jacky Wen finished introducing this part, when he glanced at Yan Zhongcheng sitting below from the corner of his eye, he found that the latter did not seem to show any emotional fluctuations.
?This made him a little worried.
?However, Jacky Wen quickly adjusted his mentality.
Because, there is another "freezing trump card" later.
He turned the PPT to the next page.
The above is the title of the second part:
Adaptive processing of the receiver.
“On the other hand, compared with aero engines, marine gas turbines, while pursuing higher efficiency under design conditions, also require better stability at non-design speeds. Therefore, it is necessary to ensure that marine gas engines have high performance at high speeds. While improving efficiency, special consideration should be given to its actual operating stability under lower working conditions.”
After a short pause, Jacky Wen continued to introduce:
"For this reason, we designed an adaptive processing casing while trying to keep the core components as common as possible. It has openings at the leading edge and trailing edge of the moving blade, and is connected through a bridge structure in the middle. Using the front and rear The pressure difference between the two openings causes the airflow near the rear opening to open forward, thereby changing the core of the tip clearance vortex and effectively weakening the generation of secondary flow from tip leakage..."
“This design can take into account compressor efficiency and stability margin, and is suitable for blocking stalls and tip overload stalls in cusp stalls, as well as modal stalls.”
“According to simulation tests, when the compressor is in modal stall, the new adaptive casing can expand stability by up to 2%, and when the compressor stall type changes to cusp stall, the stability expansion effect can reach 6%. Overall, It can increase the average thermal efficiency of the steam turbine by 3.5% under operating conditions below 50% speed, while the efficiency at the design point is only reduced by 0.23%, with almost no adverse effects..."
Yan Zhongcheng was quietly listening to Jacky Wen’s introduction below, his expression gradually becoming playful—
?The other party just mentioned the difference between marine gas turbines and aviation engines, obviously to emphasize their lack of experience in the field of marine power.
?Of course, we must admit that this adaptive receiver technology is indeed quite clever.
With a relatively small cost, it is possible to achieve both high and low speed performance of the gas turbine.
It can be regarded as solving a huge pain point of gas turbine power.
??If I had come to the meeting earlier, I might not have been able to come up with any good solutions.
But now, things are different—
Three days ago, the multi-level adjustable stator blade matching technology proposed by Mr. Chang seemed to have the same goal but a tit-for-tat meaning...
(End of this chapter)